[urq] Water inside EURO CIBIE headlights

Ado Sigal a.sigal at bluewin.ch
Wed Feb 21 20:59:53 EST 2007


Hi Maurits

Had same problem with my ex Ur after changing seals and reflectors. 
Although it was nicely cleaned, it continued to leak. It was cured by 
warming up the lens and the gasket, and squeezing the clips in the vice 
to make them grip more. On present Ur however, same procedure didn't 
help, so polyurethane sealer was applied (that's what I had, but any 
soft setting sealer would do), and that cured it. One of the fog lights 
also had same problem, and that was cured with Hylomar and turning the 
old gasket around. Unfortunately Hylomar comes only in blue, so it can't 
be used on the main lenses.

Cheers,

Ado



Maurits Jonkergouw wrote:

>I've already replaced the gaskets (new) that seals the glass from the body, but the moist from rain is still getting in and I don't understand why and where.
>
>Does any of you had any luck sealing them off or knows why it can't get out/ dries up? 
>
>Thanks
>
>
>Regards,
>Maurits
>
>  
>




More information about the urq mailing list