[urq] URQ Brake lights

[Maurits Jonkergouw]

Check if the base plate metal sheet track is not 'lifted' from the plastic 
plate by heat over the years. You might need to re-secure it with a popnail 
in order to it make contact again with the feed line. Hard to explain, but 
just take the plate out and look very carefull, then you might see what I'm 
talking about. BTDT.

Regards,
Maurits

1986 quattro GV
1982 Coupe GL DD


----- Original Message ----- 
From: <dgraber460 at aol.com>
To: <urq at audifans.com>; <quattro at audifans.com>
Sent: Thursday, July 19, 2007 8:23 PM
Subject: [urq] URQ Brake lights


>I have been it seems driving for some time without brake lights.
> Patient - 83 early under dash URQ
>
> Fuse good.
> Bulbs are good.
> Grounds are good.
> E-Flashers work.
> Signals work
> Pedal Switches work.
> Rest of tailights work.
>
> I have not had much time at all to look into this but last night I found I 
> have no power at the pedal switches. I dread tracing this anywhere (if 
> that is even possible) with the bundle of spaghetti wires the "superior 
> German engineers" gave us to deal with.
> Any usual suspects from BTDT?
>
>
> Dennis
> Denver
>
> ________________________________________________________________________
> AOL now offers free email to everyone.  Find out more about what's free 
> from AOL at AOL.com.
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!
>