[urq] Finally back from the body shop

[Bob]

Gets mine going too! Im just waiting for a break in the weather so I can 
take mine apart and give it a proper paint job. After seeing these pics, 
I want to do it NOW! :) 
Looking great!

Brandon Rogers wrote:
> Lookin' good, Mike.  That mus tget th emotivation level increased even
> further - seeing parts in there.
>
> Keep us posted-
>
> Brandon
>
> -----Original Message-----
> From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
> Behalf Of Mike Sylvester
> Sent: Tuesday, March 06, 2007 7:25 PM
> To: urq at audifans.com
> Subject: [urq] Finally back from the body shop
>
>
> I tried sending this to the list a week ago and have had trouble with my
> outbound mail to audifans. I think it may be fixed now so here it goes
> again...
>
> It's only been 3 years, but I finally have the bodyshell back from the
> shop. The rust is fixed and the car is in primer and is edged.  After I
> re-install the drivetrain and suspension the entire body will get
> painted.
>
> I've started doing a little test fitting in the engine bay.
> I posted a few photos:
> http://www.urq20v.com/body/Engine_bay/Engine_Bay_test_fit.htm
>
> I'll try to keep current progress on my site.
>
> Mike
>
> www.urq20v.com
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>