[urq] Ignition switch?

[James Howard]

Jim is right.

To remove the switch (electrical part only):-

Remove steering wheel
Remove dished washer & spring
Remove indicator / wiper stalks
Insert key in ignition to release steering lock
Remove large Allen head bolt on one side of the aluminium lock assembly
Slide the whole lock assembly off the column
Look in the back of the lock assembly - you'll see the white plastic 
electrical switch held by one small cross head screw.

You only need to do the drilling if you want to replace the lock barrel / 
steering lock.

Cheers,

Jim.

----- Original Message ----- 
From: "Jim Haseltine" <jim_haseltine at ntlworld.com>
To: "Martin Pajak" <martin at quattro.ca>; <DGraber460 at aol.com>; 
<urq at audifans.com>
Cc: <quattro at audifans.com>
Sent: Sunday, March 25, 2007 12:59 PM
Subject: Re: [urq] Ignition switch?


> You only need to drill to remove the steering lock - the switch should be
> retained by a small screw.
>
> Anyway, for those who want to know where to drill:
> http://homepage.ntlworld.com/jim_haseltine/quattro/tech/steering_lock.html
>
> Regards,
>
> Jim Haseltine
>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!