[urq] In Tank Screen Removal

[QSHIPQ at aol.com]

Different tanks.  The CGT is 15 gals, the Urq is 24.7gals  IIRC,  the screen 
designs are different too.  The procedure for tank cutting  and cleaning is 
usually to drain, then fill with water, then cut open, recoat  (rescreen), and 
weld back together.
 
Scott J
 
 
In a message dated 10/17/2007 3:39:56 P.M. Central Daylight Time,  
jack at walkerperformancegroup.com writes:

Does an  85 CGT have the same tank? And are the fittings the same as my  83
UrQ?



I’ve got one that I’ve been trying to figure out  what to do with it? I was
required to have it out before the CGT got  scraped.

It hasn’t been flushed, and I’d be a little scared to cut it  apart w/o some
flushing, so what would you use to flush that’s going to get  out old gas and
not be as explosive?



Looking like perfect  practice, or if I can do it once replace mine?



Jack  Walker


 



************************************** See what's new at http://www.aol.com