[urq] (no subject)

[Ben Swann]

Thanks for the warning.

 

I'll stick with the normal prop rod.

 

Ben

 

  _____  

From: W Stedman [mailto:wstedman at sbcglobal.net] 
Sent: Wednesday, February 27, 2008 1:12 PM
To: Ben Swann; urq at audifans.com
Subject: Re: [urq] (no subject)

 


Your Carbon hood is too light and would snap in half under the pressure!

----- Original Message ----
From: Ben Swann <benswann at verizon.net>
To: urq at pacbell.net
Cc: Ben Swann <benswann at verizon.net>; urq at audifans.com
Sent: Wednesday, February 27, 2008 9:53:23 AM
Subject: [urq] (no subject)

Steve,

I?d be interested in knowing about this as I have a CF hood I?d like to do this on.

Ben

[Date: Tue, 26 Feb 2008 21:59:01 -0800
From: "urq" <urq at pacbell.net>
Subject: [urq]  Hood lifter mods ...
To: <Urq at audifans.com>
Message-ID: <032301c87905$da46ce90$8ed46bb0$@net>
Content-Type: text/plain;    charset="us-ascii"

I saw that Blau had a conversion kit to add pressurized struts to the urq
hood so I ordered it ... before I go and drill the 4 holes for it I thought
I'd see if any others here have used this kit, or is it better to get the
factory parts?  By any chance does anyone know if the gas cylinders Blau
uses are standard cylinders?  I don't see any markings on them, so I want to
make sure that they are readily available.  From what I've seen of Audi hood
struts they don't seem to use the ball and socket joints for attaching.  

Thanks!
Steve B
San Jose, CA (USA)]
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
UPG2008 planning at: http://autos.groups.yahoo.com/group/urquattro/

You can help keep the audifans site running by shopping at http://audifans.com/shop/