[urq] part number request please

[SpotatAshleys]

Just to add a bit more detail, the VDO oil temp gauge has the following
markings:

60 | 130 | | | 170

Even after a moderately fast run it doesn't register  higher than the mark
between the 60 and the 130. I can't believe the oil runs at such a low temp
so it suggests to me I don't have the correct sender for the gauge, but what
is the right one?
Any part number suggestions gratefully received.
All the best

Keith

'87 WR

----- Original Message -----
From: "Louis-Alain Richard" <larichard at plguide.com>
To: "'Maurits Jonkergouw'" <urquattro at moregraphics.nl>; "'Audifans'"
<urq at audifans.com>
Cc: "'SpotatAshleys'" <spotatashleys at hotmail.com>
Sent: Thursday, May 29, 2008 9:39 PM
Subject: RE: [urq] part number request please


That's oil pressure senders, Maurits...:_)

Oil temp sender, the one in the oil pump ?

2 sizes: both 0-180C

M18x1.5 (early)
035 919 521

M22x1.5 (late)
035 919 521B

Yours is the second one I guess.

BTW, 035 919 501 is the water temp sender for the ECU, at least on my WX. It
is on the head, above cylinder 1.

Louis-Alain



-----Message d'origine-----
De : urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] De la part
de Maurits Jonkergouw
Envoyé : 29 mai 2008 16:19
À : Audifans
Objet : Re: [urq] part number request please

F >> 85-D-250 000 2-pole transparant 0.3 bar P/N 035 919 561

F 85-E-000-001 >> 2-pole black 1.8 bar P/N 035 919 561 A


HTH

Regards,
Maurits

1986 quattro GV


----- Original Message -----
From: "SpotatAshleys" <spotatashleys at hotmail.com>
To: <urq at audifans.com>
Sent: Thursday, May 29, 2008 9:55 PM
Subject: [urq] part number request please


> Evening all
> Can anyone supply me with the part number for the oil temperature sender
> for a 1986 Coupe GT with the KV engine - the one that goes with the VDO
> gauge in the three dial pod? I'm seeking confirmation that this is
> different from the oil temperature sender that goes with the "digital" oil

> temp gauge in the urq (part number 035  919 501).
> I have put the VDO gauges in my car but the oil temp never gets anywhere
> near normal so I'm thinking I need to get the coupe GT sender to rectify
> this. Am I right?
> I have access to the "elktro" family album but not etka for other models.
> Many thanks in advance.
> Regards
> Keith
>
> '87 WR