[urq] 01E in an UrQ - How To

[Martin Pajak]

Hi Pat,

Shifter from an Ur-s4 fits without mods on newer cars.
Your CBL had a pro-con 10 bracket in the tail housing which makes things
difficult.  The newer 01Es do not have it (it's a bolt on) and it's very
close to shape of the 016.
Ralf Wiesner had the entire shift linkage from Ur-S4 on his Coupe Quattro
(typ 85).

Andrew,

I am gathering parts to do the conversion and have made a provisional list
on my motorgeek project page (4000q 2.5tdi with 6-speed).

Cheers
-- 
Martin Pajak

http://www.quattro.ca

1982 Audi Ur-quattro, SQ project
1983 Audi 80 quattro, Euro 2-Tür
1986 Audi 4000cs quattro, 2,5 TDI mit 6 gang
1987 Audi 4000s quattro, wintervagen mit 7A und 5 bolt :)




> Patrick Carlier
> Looking for a six speed are you
> Or a 01E with the shorter fifth maybe ?
>
> BTDT .... sorta .
>
> I've installed a 7A combined with a CBL 6 spd in an '86 coupe quattro  .
> Same body as the Ur , but without the enlarged fenders and with a modest
> 136Hp stock .
> Much like the US GT , but in europe we got the quattro version .
>
> Shift linkage is custom made , and it's the hardest part of the
> transformation .
> A few bits from the original linkage , a few bits from the UR-S4
> and a lot of custom machining and welding .
> Took me 3 day's of crawling in and under the car to get it right .
> But it fit's and works perfcetly . Space is very limited , but
> I insisted to make no modifications whatsoever to the tunnel or car body .
> Reverse gear engagement protection works as it should .
> Reverse is  up and left , right next to the first gear instead of down and
> right as in
> the 016 gearboxes . So we don't want to accidently put it in reverse .
> And all interior trim fits as it was before .
> Except for the six spd shiftknob I installed  :) nothing indicates the car
> has a six speed installed  .
>
> Car's on the  road for two years now , so I guess I can say it's succesful
> .
> :)
>
> Pat
>
>
>
>
> ----- Original Message -----
> From: "AF" <afinn1 at gmail.com>
> To: "urq" <urq at audifans.com>
> Sent: Wednesday, October 14, 2009 8:57 PM
> Subject: [urq] 01E in an UrQ - How To
>
>
>> I'm looking for some BTDTs on installling an 01E transmission in an UrQ.
>> I
>> assume custom shift linkage is in order. Does anyone have a preferred
>> way
>> of
>> doing this (modify the UrQ linkage or start with some other set of
>> linkage)?
>> Do the UrQ front CVs bolt right up? I believe I have to shorten the
>> drive
>> shaft..... does the UrQ drive shaft CV bolt right up to the 01E output
>> flange? And the big one....... do I need to modify the floor pan in any
>> way?
>> Thanks so much for any help or pointers.
>>
>> Andrew Finney
>> 1985 UrQ V8
>> _______________________________________________
>> Audifans urq mailing list
>> Manage your list connection:
>> http://www.audifans.com/mailman/listinfo/urq
>> http://www.audifans.com/kb/List_information
>>
>> Pictures/Polls/Database at:
>> http://autos.groups.yahoo.com/group/urquattro/
>>
>>
>
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>
>


--