[urq] URQ fuel pump?
Steve Eiche
seiche at shadetreesoftware.com
Sun Jun 20 10:26:31 PDT 2010
Dennis,
Are you talking about the plastic line or the steel line? Either can be
made up up. The plastic is pretty much the same as the fuel lines used
on the newer Audis (and pretty much all cars for that matter). Cut the
old stuff off the metal fittings carefully so as not to nick the barbs
and duplicate it with the new plastic line. It can be heated and formed
with a heat gun. I deal with a few repair shops that do/did this on a
fairly regular basis. Old Porsches or other cars use the plastic lines
for CIS injection.
The metal hard line can be bent and formed pretty easily. I have the
double flare tool needed for the ends.
The other option is to make up what you need from AN lines.
The pump is easy. Pretty much any external pump made for fuel
injection can be made to work. 034 sells a kit I believe using the
Bosch O44 pump. There is also a Walbro that is commonly used.
Steve
dgraber460 at aol.com wrote:
> Well it seems to be time to address my fuel pump and all its
> accompanying annoyances.
> I have a spare and other parts from now dead CGT and URQ and thought I
> would be covered. Well.....not so much.
> The lovely little line from the pump outlet to the pressure
> accumulator is cracked, and that is the ONLY spare I don't have.
> With the Darwin award winning design of the pump and it's electrical
> connectors and plumbing proximity, I would just as soon replace all of
> this with something more serviceable (if not outrageously expensive.
> What are the options for this line/hose, and maybe the pump itself?
> I think the archives should have a thread about this some time back.
> Any one remember about what time frame, and have advice for accessing
> same?
> TIA
> Dennis
> Denver
More information about the urq
mailing list