[urq] 034 MS firewall brace/bracket installation

[Ed Kellock]

I've installed two of these, the 1st on the 85 urq, the 2nd on the 87 CGT.
The one I got for the urq came from the Creator, Jeff Lewis.  The part for
the CGT came from 034.  The urq part installed perfectly.  The CGT one
didn't quite, but I don't recall what the issue was.  I should probably
revisit that install as I recall kind of wedging it in or having to
otherwise mess with it.  

Ed
 


-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Ben Swann
Sent: Tuesday, May 18, 2010 8:11 AM
To: urq at audifans.com
Cc: benswann at verizon.net
Subject: [urq] 034 MS firewall brace/bracket installation



I am having some fitment issues with the firewall bracket I got from 034
Motorsport.  I am waiting to hear back from Javad at 034, but in the meantime
trying to make it work. Presently with brace bolted to the steering rack,
the master cyl. End is not lineing up with where the MS goes - about 1/4"
too high and 1/4" too far to the center of the car.

I already had to machine some metal off  the part that slips around the
cylinder which was too large in diameter to slip over.

Any BTDT with installation?  Car is '83 Ur Quattro with Original Clutch
Master AFAIK.

Ben
_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.819 / Virus Database: 271.1.1/2881 - Release Date: 05/18/10
00:26:00