[urq] UrQuattro rear brakes

[audiqtrocp]

The cables you need are for the 4000 to be the proper length to allow adjustment.  Type 44 cables are too long for the type 85 cars.  Also grab the yoke for the 4000 too.   

Sean

Sent from my iPhone

On Sep 10, 2010, at 11:17, Steve Mills <s.b.mills at gmail.com> wrote:

> V8 or UrS (C4 S-car) rears are identical, so you can source either. These
> rears tend to have issues (eventually) with the parking brake cam, so some
> people do some extra prep work to help protect that area from corrosion.
> Other than needing the later rear e-brake setup, it's P&P.
> 
> I'd think you'd remember this, Ben- Scott put an S-car rear brake setup I
> had as "spares" for my S6 on the famous/infamous "General Lee" for it's trip
> back to Chicago after we discovered that the only rear brake components
> present on the car were one hanger and one bolt ;-)
> 
> Steve
> 
> On Fri, Sep 10, 2010 at 11:01 AM, Ben Swann <benswann at verizon.net> wrote:
> 
>> 
>> What substitutes can be used to replace and improve upon the original rear
>> calipers and
>> rotors?  I'm looking for a cost effective solution to replace my rear brake
>> components.
>> 
>> I used 5000 turbo quattro calipers before, and I think 4000Q calipers are
>> the same only
>> left is right and vice versa.
>> 
>> Do V8 quattro brakes work and have correct offset rotor?
>> 
>> Ben
>> _______________________________________________
>> quattro mailing list
>> http://www.audifans.com/mailman/listinfo/quattro
>> http://www.audifans.com/kb/List_information
>> 
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>