[urq] Does anyone have the GTI BallJoint Part numbers?

[Robert A Dupree]

I am trying to finish the UrQ refresh project and I swapped to new front tie-rods that were a match to the RS2 & '90 model-90 front-driver.
811419802K	FR tie rod
811419801E	LF tie rod
In order to make this swap work I am told that I need Golf/GTI tie-rod ends.  I have verified that the tie-rod ends on the ..802K & ..801E have too-skinny a shaft on the balljoint to fit into the UrQ strut arm.

So does anyone have the part number of what will work?
I would like to order them up and since VagCat is gone - I am powerless to find part numbers.

General Status Update of the project:  Since we left off last January I ended up needing to re-do the entire fuel system between the engine and the tank.  Refinished/replaced all lines, new pump, deleted accumulator, new filter, new new new.  So new in fact that the new pump when tested was bad.  Grrr.  NewFP2.0 is on the way.  Every bushing & mount for the suspension and driveline has also been replaced.  New control arms installed.  My small-dif-housing customer 4.11 Torsen built by Scott D. in Corpus is now in the rear subframe and all bolted up.  OK so I lost the entire hot months in Texas, but my garage has no A/C.  So now it's time to start getting serious again.  Once the NewFP2.0 is installed I hope to hear the VEMS managed 3B fire up again which should really ignite my desire to work on the car.

Rob Dupree
  '84 Ur
  '07 V10 TDI Touareg
  '01 S4


This communication is for informational purposes only. It is not
intended as an offer or solicitation for the purchase or sale of
any financial instrument or as an official confirmation of any
transaction. All market prices, data and other information are not
warranted as to completeness or accuracy and are subject to change
without notice. Any comments or statements made herein do not
necessarily reflect those of JPMorgan Chase & Co., its subsidiaries
and affiliates.

This transmission may contain information that is privileged,
confidential, legally privileged, and/or exempt from disclosure
under applicable law. If you are not the intended recipient, you
are hereby notified that any disclosure, copying, distribution, or
use of the information contained herein (including any reliance
thereon) is STRICTLY PROHIBITED. Although this transmission and any
attachments are believed to be free of any virus or other defect
that might affect any computer system into which it is received and
opened, it is the responsibility of the recipient to ensure that it
is virus free and no responsibility is accepted by JPMorgan Chase &
Co., its subsidiaries and affiliates, as applicable, for any loss
or damage arising in any way from its use. If you received this
transmission in error, please immediately contact the sender and
destroy the material in its entirety, whether in electronic or hard
copy format. Thank you.

Please refer to http://www.jpmorgan.com/pages/disclosures for
disclosures relating to European legal entities.