[urq] Clutch for 20vt install?

[qshipq at aol.com]

 Eric
The answer is "it depends".  I was the first shop to actually try to fit the Fidanza Flywheel to a tq016 many years ago (late 90's).  The early Fidanza flywheels were not correctly machined for the 20vt motors.  Basically the depth of the flywheel was around 6-7mm too deep IIRC, which caused the clutch to not be able to fully engage.  I ended up making a jig on a press and determined that the thickness dimension of the FW was incorrect.  I might have the notes I made on was was required to make it fit.  Also found out at the time BTW, that on this particular early FW - Fidanza put the timing pin in the correct location, but it was an aluminum pin not steel.   

Otherwise, you can use the 91 200tq FW and Clutch with an AAN/016 as a bolt-on.  

HTH

Scott J
84 Urq
83 Urq
86 4kq

 


 

 

-----Original Message-----
From: Brandon Rogers <brogers at terrix.com>
To: 'Eric J. Fluhr' <ejfluhr at austin.rr.com>; urq at audifans.com
Sent: Wed, Feb 23, 2011 10:10 am
Subject: Re: [urq] Clutch for 20vt install?


Assuming the AAN crank is same as 3B (I think it is) - yes just 200 20V

clutch (assuming th Fidanza FW doesn't affect anything).  I have a Southbend

Stage II organic material disc. I think it uses normal SACHS pressure plate

- clutch feels like stock.  If you don't get a new flywheel - make sure to

have your old one resurfaced.  



Brandon 

'84 urq 20Vt

 

 





-----Original Message-----

From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf

Of Eric J. Fluhr

Sent: Tuesday, February 22, 2011 11:12 PM

To: urq at audifans.com

Subject: [urq] Clutch for 20vt install?





Hi gang,



My AAN motor is sloooowly coming along (no LeMons/ChumpCar racing until July



in the 90q20v's), and I am starting to gather

the parts I need to install it into my '82 urq.   I was hoping to get some 

advice from y'all about what clutch PP, disc, and TO

bearing I need.   I plan to use a Fidanza aluminum flywheel that I picked up



many, many years ago.  Will a straight-up 200q20v

clutch kit work for the AAN + 016?



If so, I was thinking of trying the Southbend HD-Stage 2-Endurance since 

she'll be mostly a weekend driver but probably see quite a bit of track 

time.

 

http://www.034motorsport.com/clutches-flywheels-southbend-clutches-flywheels

-audi-200-turbo-southbend-clutch-kit-p-20160.html



Does anyone have clutch recommendations based on what they have tried?



Cheers,

Eric

82' urq





_______________________________________________

Audifans urq mailing list

Manage your list connection: http://www.audifans.com/mailman/listinfo/urq

http://www.audifans.com/kb/List_information



Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/





_______________________________________________

Audifans urq mailing list

Manage your list connection: http://www.audifans.com/mailman/listinfo/urq

http://www.audifans.com/kb/List_information



Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/