[urq] Clutch for 20vt install?

[dgraber460 at aol.com]

Also found out at the time BTW, that on 
his particular early FW - Fidanza put the timing pin in the correct location, 
ut it was an aluminum pin not steel.   

Oh wow, how long did it take to diagnose that one, or were you fortunate/observant enough to notice before install?


Dennis 
Denver

-----Original Message-----
From: qshipq at aol.com
To: brogers at terrix.com; ejfluhr at austin.rr.com; urq at audifans.com
Sent: Wed, Feb 23, 2011 10:01 am
Subject: Re: [urq] Clutch for 20vt install?




Eric
he answer is "it depends".  I was the first shop to actually try to fit the 
idanza Flywheel to a tq016 many years ago (late 90's).  The early Fidanza 
lywheels were not correctly machined for the 20vt motors.  Basically the depth 
f the flywheel was around 6-7mm too deep IIRC, which caused the clutch to not 
e able to fully engage.  I ended up making a jig on a press and determined that 
he thickness dimension of the FW was incorrect.  I might have the notes I made 
n was was required to make it fit.  Also found out at the time BTW, that on 
his particular early FW - Fidanza put the timing pin in the correct location, 
ut it was an aluminum pin not steel.   
Otherwise, you can use the 91 200tq FW and Clutch with an AAN/016 as a bolt-on.  

TH
Scott J
4 Urq
3 Urq
6 4kq
 


 
-----Original Message-----
rom: Brandon Rogers <brogers at terrix.com>
o: 'Eric J. Fluhr' <ejfluhr at austin.rr.com>; urq at audifans.com
ent: Wed, Feb 23, 2011 10:10 am
ubject: Re: [urq] Clutch for 20vt install?

ssuming the AAN crank is same as 3B (I think it is) - yes just 200 20V
clutch (assuming th Fidanza FW doesn't affect anything).  I have a Southbend
Stage II organic material disc. I think it uses normal SACHS pressure plate
- clutch feels like stock.  If you don't get a new flywheel - make sure to
have your old one resurfaced.  

Brandon 
'84 urq 20Vt
 
 


-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Eric J. Fluhr
Sent: Tuesday, February 22, 2011 11:12 PM
To: urq at audifans.com
Subject: [urq] Clutch for 20vt install?


Hi gang,

My AAN motor is sloooowly coming along (no LeMons/ChumpCar racing until July

in the 90q20v's), and I am starting to gather
the parts I need to install it into my '82 urq.   I was hoping to get some 
advice from y'all about what clutch PP, disc, and TO
bearing I need.   I plan to use a Fidanza aluminum flywheel that I picked up

many, many years ago.  Will a straight-up 200q20v
clutch kit work for the AAN + 016?

If so, I was thinking of trying the Southbend HD-Stage 2-Endurance since 
she'll be mostly a weekend driver but probably see quite a bit of track 
time.
 
http://www.034motorsport.com/clutches-flywheels-southbend-clutches-flywheels
-audi-200-turbo-southbend-clutch-kit-p-20160.html

Does anyone have clutch recommendations based on what they have tried?

Cheers,
Eric
82' urq


_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/


_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/



______________________________________________
udifans urq mailing list
anage your list connection: http://www.audifans.com/mailman/listinfo/urq
ttp://www.audifans.com/kb/List_information
Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/