[urq] Oil Filter Question

[mike schowengerdt]

i think that filter would do fine,  the other alternative that comes to mind is 
the filter for the early 3.6 & 4.2 engines in the original V8 car,  "standard" 
diameter and very long , oem # 077 115 561E ,  just a thought.........m


________________________________
From: AF <afinn1 at gmail.com>
To: urq <urq at audifans.com>
Sent: Tue, November 1, 2011 6:16:34 PM
Subject: [urq] Oil Filter Question

I am in the process of converting my V8 UrQ from oil/water cooling which
was stock on the ABZ to a separate dedicated air/oil cooler. I am using a
GReddy oil filter housing with built in thermostat. The larger oil filters
I use on the 1.8t in my 2004 A4 fit perfectly on this housing and the the
seal seems to line up with the oil filter housing. My question is this....
will the 1.8t filter (Mann or Mahle OEM) be capable of handling the ABZ oil
flow and/or pressure? I know nothing about oil filter requirements except I
know it fits, and I imagine different filters have different flow rates.
There is no "OEM" cannister oil filter for the ABZ because it has a paper
filter type deal in a dedicated aluminum housing. Any thoughts are greatly
appreciated.

Andrew Finney
1985 UrQ V8
_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/