[urq] Repair fiberboard inner door covers?

[Louis-Alain]

Fiberglass is VERY smelly... Beware that your car will smell like a boat (or
like an old Corvette :-)) for a while...

Louis-Alain

> -----Message d'origine-----
> De : urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] De la part
> de Eric J. Fluhr
> Envoyé : 24 janvier 2012 2:24
> À : urq at audifans.com
> Objet : [urq] Repair fiberboard inner door covers?
> 
> Hi gang,
> 
> What suggestions do y'all have for repairing the fiberboard door covers?
> One of mine is damaged with
> a ~5" jagged tear in the board, which is bulging out from the back an inch
> due to slight warpage of the panel.
> I don't want to install the door panel for fear of it ripping apart the
> next
> time I remove it from the door.
> I did a little research but did not find anything for that form of
> fiberboard repair.
> 
> I don't have any experience with the stuff, but I was considering epoxy
> resin laminate or perhaps layering on
> fiberglass fabric with the epoxy resin.  System Three makes a form of it
> designed for wood+fiberglass boat
> construction, which seems reasonably well suited to the fiberboard of the
> door card.   Does anyone have direct
> experience with fiberglass that is relevant to this fix?
> 
> Thanks,
> Eric
> '82 urq
> 
> 
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/