[urq] Prop shaft boot

[Louis-Alain Richard]

And cheap too : 12$ for the jobber Lobro part. 60$ for the OEM.

http://www.autoatlanta.com/results.php?partnumber2=944%20331%20903%2000 

Louis-Alain



-----Message d'origine-----
De : Louis-Alain Richard [mailto:laraa at sympatico.ca] 
Envoyé : 13 novembre 2012 09:27
À : 'AF'; 'urq at audifans.com'
Objet : RE: [urq] Prop shaft boot

Hi Andrew,

If my memory is still good, I think they were identical to some Porsche 944 drive shaft boots...

Ah ah ! Now I know it was ringing a bell : I wrote this message myself about it in 2010. Now I know that my memory is slowly
failing...


http://ec2.audifans.com/pipermail/urq/2010-September/016788.html 

> Thanks for sharing the info, David. I've change the subject for the 
> archives.
> 
> The boot in question is for the rear axles of a 944 (944 331 903 00). 
> It is used at both end of each wheel axle, auto or manual. FYI, in the 
> 944, the gearbox is at the rear, between the wheels, and there is a 
> rigid tube connecting the engine and the transaxle in which spins a 
> small diameter propshaft.
> 
> Dimensions are : 100 mm inside diameter big end, 21 mm inside diameter 
> small end, 98 mm nominal length.
> 
> Infos are from the GKN online catalogue :
> http://www.gknservice.com/gb/passenger_cars/online_catalogue.html   


> -----Message d'origine-----
> 
> The part number for the CV boots I am using on my prop shaft are:
> GKN 300477 on the box. AKA GKN/ Lobro P/N 94433190300.
> 
> David



Louis-Alain