[urq] Prop shaft boot

[AF]

You are a god. Thanks so much. Andrew. 

Sent from my iPhone

On Nov 13, 2012, at 6:36 AM, Louis-Alain Richard <laraa at sympatico.ca> wrote:

> And cheap too : 12$ for the jobber Lobro part. 60$ for the OEM.
> 
> http://www.autoatlanta.com/results.php?partnumber2=944%20331%20903%2000 
> 
> Louis-Alain
> 
> 
> 
> -----Message d'origine-----
> De : Louis-Alain Richard [mailto:laraa at sympatico.ca] 
> Envoyé : 13 novembre 2012 09:27
> À : 'AF'; 'urq at audifans.com'
> Objet : RE: [urq] Prop shaft boot
> 
> Hi Andrew,
> 
> If my memory is still good, I think they were identical to some Porsche 944 drive shaft boots...
> 
> Ah ah ! Now I know it was ringing a bell : I wrote this message myself about it in 2010. Now I know that my memory is slowly
> failing...
> 
> 
> http://ec2.audifans.com/pipermail/urq/2010-September/016788.html 
> 
>> Thanks for sharing the info, David. I've change the subject for the 
>> archives.
>> 
>> The boot in question is for the rear axles of a 944 (944 331 903 00). 
>> It is used at both end of each wheel axle, auto or manual. FYI, in the 
>> 944, the gearbox is at the rear, between the wheels, and there is a 
>> rigid tube connecting the engine and the transaxle in which spins a 
>> small diameter propshaft.
>> 
>> Dimensions are : 100 mm inside diameter big end, 21 mm inside diameter 
>> small end, 98 mm nominal length.
>> 
>> Infos are from the GKN online catalogue :
>> http://www.gknservice.com/gb/passenger_cars/online_catalogue.html   
> 
> 
>> -----Message d'origine-----
>> 
>> The part number for the CV boots I am using on my prop shaft are:
>> GKN 300477 on the box. AKA GKN/ Lobro P/N 94433190300.
>> 
>> David
> 
> 
> 
> Louis-Alain
> 
> 
> 
>