[urq] clutch master cylinder

[Louis-Alain Richard]

I guess you have a problem similar to mine.

The pushrod is attached to the pedal via a u-shaped thingy (a clevis ?) with
a steel pin an a circlip at the pedal. On my car, that pin enlarged the hole
in the pedal so the adjustment on the rod was too short. I had to fabricate
a bushing to recenter the steel pin in the ovalized hole. I used a steel nut
with a flange that I machined on my bench grinder to conform to the ovalized
hole of the pedal. I drilled the threads to the steel pin diameter. Press
fitted it in the pedal, it is still on the car today. Solid clutch pedal
with no play at all.

Louis-Alain
(ETKA pages to follow for you to see.)


> -----Message d'origine-----
> De : urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] De la part
> de Chris Miller
> Envoyé : 15 octobre 2012 7:56
> À : urq at audifans.com
> Objet : [urq] clutch master cylinder
> 
> When I picked up my project urq, it didn't have the clutch master cylinder
> installed.  Bought a new one, installed it along with a firewall brace.
> Pushrod doesn't seem to adjust long enough to reach pedal.  Also I need to
> figure out how the pushrod attaches to the pedal; anyone replaced theirs?
> 
> Chris
> 
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/