[urq] Known good brake servo or source for rebuild kit(s)?

[Steve B]

Since you are talking about an '85 I'd recommend you check to see if it has the cast iron or alloy part, they are different.  IMO Ben Howell would be the person to talk to, he used to offer kits for both.  I don't think he does that anymore, but I suspect he'd give you the specs.

This has been discussed on the list before, you might want to see if you could find the info in the archives.

Steve Buchholz


Steve Mills <s.b.mills at gmail.com> wrote:

I recently found that the brake servo in my 85 UrQ is leaking. Does anyone
have a known good used servo, or a source for a rebuild kit? I found the
rebuild instructions on Phil Payne's site, but it doesn't mention where one
can source the kit.

Thanks-

Steve
_______________________________________________