[urq] Known good brake servo or source for rebuild kit(s)?

Steve Mills s.b.mills at gmail.com
Mon Jan 7 11:43:32 PST 2013


Steve-

Thanks- I did an archive search before I sent the email, and while it has
been discussed it hasn't been recently- the most recent post I could find
was from 2009. I wasn't able to find pictures of cast iron vs. alloy, but
mine looks like the alloy ones pictured on Phil Payne's site and elsewhere.


On Mon, Jan 7, 2013 at 2:21 PM, Steve B <urq at pacbell.net> wrote:

> Since you are talking about an '85 I'd recommend you check to see if it
> has the cast iron or alloy part, they are different.  IMO Ben Howell would
> be the person to talk to, he used to offer kits for both.  I don't think he
> does that anymore, but I suspect he'd give you the specs.
>
> This has been discussed on the list before, you might want to see if you
> could find the info in the archives.
>
> *Steve Buchholz*
> *
> *
> *
> *
> *Steve Mills <**s.b.mills at gmail.com* <s.b.mills at gmail.com>*> wrote:*
> *
> *
> *I recently found that the brake servo in my 85 UrQ is leaking. Does
> anyone *
> *have a known good used servo, or a source for a rebuild kit? I found the
> *
> *rebuild instructions on Phil Payne's site, but it doesn't mention where
> one *
> *can source the kit. *
> * *
> *Thanks- *
> * *
> *Steve *
> *_______________________________________________ *
> *
> *
> * *
>


More information about the urq mailing list