[urq] 4000Q rear axles

[Mike Sylvester]

Etka shows the 4kq rear the same as the urq front swapped left to right,
but you would think the urq front would also be the 108mm.  Maybe it is
'84 only.

Mike

> -------- Original Message --------
> Subject: [urq] 4000Q rear axles
> From: AF <afinn1 at gmail.com>
> Date: Wed, September 04, 2013 10:05 am
> To: urq at audifans.com
> 
> 
> I ordered a left rear axle for a 4000q and it arrived with a 100mm inner joint. I am fairly to completely certain that all 85- 4000qs have 100 mm inner joints in the rear. This is completely wrong in ETKA then, which shows the same PN as the urq rears (108mm). Maybe the 1984 model had the urq 108mm rears. My question is this, does 100mm mean that the axle shaft itself is the smaller diameter one? Or were there thicker urq axles used with 100mm inner joints on some model? Thanks. 
> 
> Andrew Finney
> 1985 urq
> 
> Sent from the road
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/