[urq] AAN oilpan

[Martin Pajak]

Hi Pat,

The oil pan stick too much towards the driver side and can touch the
radiator.
The one you need is a 7A/3B/ABY/ADU.
You can use a 10v (B2/B3 chassis) but they are steel.

Hope this helps.
Martin Pajak

http://www.quattro.ca 

1981 VW Scirocco, all original
1982 Audi Ur-quattro, SQ project
1983 Audi 80 quattro, Euro 2-Tür
1993 Audi 90 CS quattro, 2.5 TDI with 6-speed
1993 Audi 80 quattro Avant, 2.5 TDI with 6-speed
1994 Audi S2 Avant, stock


-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Patrick Carlier
Sent: 9-Feb-14 05:48
To: 'audifans urq'
Subject: [urq] AAN oilpan

About to start the AAN conversion now . :) Shop's been cleaned and
reorganised . 
I'm now the happy owner of a brifdgeprot mill , tucked in the right rear
corner . 
Wich is why the already limited floorspace I have had to be reorganised . 

Anyway ,
Various sources tell me the AAN oilpan doesn't  fit ,  right ? 
Can't see why at first sight , but I assume it'll intrefere with the
subframe . 

So what oilpan do I need . 

I've got a 3B and a 7A and various 10V'turbo and non turbo 's .
I do believe all 10V oilpan's are thesame .  
10V would be preferred at this stage , that would allow me to keep the 3B
and 7A engines in one piece . 


Pat 

_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3462 / Virus Database: 3697/7076 - Release Date: 02/08/14