[urq] engine mounts

[Patrick Carlier]

So I have the AAn block in the car . 
Used the original ur-q aluminium supports , wich bolted right on . 
I've also got a six speed gerabox in there with custom made  tranny mounts . 
I'm using the original rubber silent blocks , both engine and gearbox . 

So here 's the problem : 

The right hand side gearbox support is about 5mm above the silent block . 
 I could force it down , or shim it  or adapt the tranny mounts .  
Thing is , I'm working with a mix n match of various ar parts , and I'm not sure of anything right now . 

I seem to recall vaguely that the original small chassis car's had shims on the right hand side engine silent block . 
But not all of them had them .. 
Two  green painted washers  with a collar ,  pressed in the silient blocks mounting ears  , lowering it a few 
mm . I'm afraid I don't have them , and I dont't have any spare silent blocks that do . 
Anyone can shed some light on this , or measure them .