[urq] temperature sender confusion

[John Terreric]

Brilliant link indeed Keith. Thank you!

Eric

From: spotatashleys at hotmail.com
To: terreric at hotmail.com; urq at audifans.com
Subject: Re: [urq] temperature sender confusion
Date: Thu, 7 May 2015 19:55:05 +0100







John
Have a read of this: http://audi.humanspeakers.com/gauges.htm 
This is what I followed when I installed the gauges in my quattro. The main bit 
of Hugh’s site is all about audio speakers but the audi section is brilliant and 
well worth book marking: http://audi.humanspeakers.com/
Hope this helps.
Regards
Keith
‘87 WR
p.s. I looked in Lawrence Meredith’s book on the quattro and that too 
confirmed, no coolant temp gauge on analogue dash quattros. Just a warning 
light.


 

From: John Terreric 
Sent: Thursday, May 07, 2015 5:52 PM
To: Keith Lloyd 
Cc: Patrick Carlier ; audifans urq 
Subject: RE: [urq] temperature sender confusion
 

Surprising.

Thanks,

Eric


> Subject: Re: [urq] temperature sender confusion
> From: 
spotatashleys at hotmail.com
> Date: Thu, 7 May 2015 16:50:55 +0100
> 
To: terreric at hotmail.com
> CC: p.carlier at pandora.be; 
urq at audifans.com
> 
> Page 52 of Jeremy Waltons 2007 book on the 
Audi quattro shows good pictures of the original analog dashs. These show only 
boost and fuel guages.
> 
> Sent from my iPhone
> 
> 
> On 7 May 2015, at 16:08, "John Terreric" <terreric at hotmail.com> 
wrote:
> > 
> > To be checked as well Patrick. Then was there 
no water temp gauge on the stock car? That would be odd for such a "hot" 
car.
> > 
> > Thank you!
> > Eric
> > 

> >> From: p.carlier at pandora.be
> >> To: 
terreric at hotmail.com; urq at audifans.com
> >> Subject: Re: [urq] 
temperature sender confusion
> >> Date: Thu, 7 May 2015 07:39:12 
+0200
> >> 
> >> If you have a classic vdo 3 gauge setup 
, the temp
> >> gauge is most likely an oil temp gauge ..
> 
>> 
> >> What's the range .
> >> 
> >> 
Pat
> >> 
> >> 
> >> 
> >> 

> >> 
> >> 
> >> 
> >> ----- 
Original Message ----- 
> >> From: "John Terreric" 
<terreric at hotmail.com>
> >> To: 
<urq at audifans.com>
> >> Sent: Wednesday, May 06, 2015 9:07 
PM
> >> Subject: [urq] temperature sender confusion
> >> 

> >> 
> >>> Hello all,
> >>> 
> 
>>> this is my first post here, even though I have been enjoying 
reading you 
> >>> all for some time.
> >>> 

> >>> I have a 84 UrQ which has been well restored (engine new, 
suspension news, 
> >>> new paint) and an upgraded ECU (I suspect 
it was from a 4000 but I did not 
> >>> get any details).
> 
>>> 
> >>> Previous owners have also installed a classic 
3 gauge VDO unit. 2 of the 3 
> >>> gauges work (oil pressure and 
battery) but not the coolant temperature. 
> >>> Again no 
assurance those senders are legit.
> >>> 
> >>> My 
mechanic is confused as there are already 3 temperature senders on the 
> 
>>> engine and one is connected to the gauge but it doesn't do anything 
to it. 
> >>> It would simply not budge at any temperature. But 
if he puts the lead to 
> >>> ground the gauge goes full scale - 
so there is a valid wiring and gauge 
> >>> functionality it 
seems.
> >>> 
> >>> So does it come from a wrong 
sender, i.e. with the wrong resistance? Or 
> >>> the right 
sender but the wrong gauge?
> >>> 
> >>> Thank you 
for your help in advance,
> >>> 
> >>> 
Eric
> >>> 84 UrQ
> >>> 
> >>> 
_______________________________________________
> >>> Audifans 
urq mailing list
> >>> Manage your list connection: 
http://www.audifans.com/mailman/listinfo/urq
> >>> 
http://www.audifans.com/kb/List_information
> >>> 
> 
>>> Pictures/Polls/Database at: 
http://autos.groups.yahoo.com/group/urquattro/
> > 
> > 
_______________________________________________
> > Audifans urq 
mailing list
> > Manage your list connection: 
http://www.audifans.com/mailman/listinfo/urq
> > 
http://www.audifans.com/kb/List_information
> > 
> > 
Pictures/Polls/Database at: 
http://autos.groups.yahoo.com/group/urquattro/
> >