[V6-12v] Ignition Project.

[Tom Christiansen]

Clive,

You were able to do this without removing the steering wheel?

I followed the Bentley procedure which calls for removing airbag, steering 
wheel, column switches, then continuing along your list.

Tom

At 11:21 AM 6/10/2005, Clive Young wrote:

>Just an FYI.
>
>
>
>I had the classic ignition switch problem, key got sort of stuck after
>starting and some of the electronics stopped functioning. I new it was
>coming as the key never snapped back after starting , it was always kind of
>sluggish.
>
>
>
>Ordered a new one from Autohausaz for $16.00. A real quick procedure.
>
>
>
>1.                   removed steering cowling cover from underneath 2 screws
>
>2.                   removed 2 screws holding in instrument cluster
>
>3.                   removed electrical connections and removed cluster
>
>4.                   unscrewed 2 small slotted screws holding plastic
>ignition switch in metal housing.
>
>5.                   unplugged and replaced plastic swich assembly
>
>6.                   put it all back together.
>
>
>
>
>
>_______________________________________________
>V6-12v mailing list
>V6-12v at audifans.com
>http://www.audifans.com/mailman/listinfo/v6-12v