[V6-12v] New there'd be a proble sooner than later!

[Clive Young]

If you are going to pull the instrument cluster replace the ignition switch
regardless for the 20.00... if that's not the prolem ... it will be soon !!!


-----Original Message-----
From: v6-12v-bounces at audifans.com [mailto:v6-12v-bounces at audifans.com] On
Behalf Of Kent McLean
Sent: Sunday, June 26, 2005 10:09 PM
To: Ron Wainwright
Cc: v6-12v at audifans.com
Subject: Re: [V6-12v] New there'd be a proble sooner than later!

Ron Wainwright wrote:
 > & as she describes it the IC gauges stopped working!!

Then she should fix it. :)

Have you checked the fuses?  It might be the wiring
harness connection to the IC.  Pull the IC; it's not
too difficult.  See:
http://www.audifans.com/twiki/bin/view/Audi/ReplacingTheIgnitionSwitch
Pull the connectors (some pull, some have clips, they all
seem to be different), clean them, spray them with some good
contact cleaner( DeoxIt, Stabilant 22), put it back together,
and hope for the best.

 >  Also I found the glove box manual & found that the
 > timing belt & such was done at 104k. So there is 60k
 > on the timing belt

When was it done?  The other limit is 5 years (the
rubber ages).

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke



_______________________________________________
V6-12v mailing list
V6-12v at audifans.com
http://www.audifans.com/mailman/listinfo/v6-12v