[V6-12v] Switch removal instruction...

[Craig D. Niederst]

I've found the safest way is to remove the vent above the switches first.
This is done by getting two pieces of coat hanger wire and bending one small
hook onto each piece. Insert them into the far left and right sides of the
vent, and hook them on something solid. Gently pull outwards, and the vent
should pop right out. Now you have access to the top of the switches and
some access to their rear plugs, which makes them easier to pop in an out.
This procedure is for the 100 BTW, so if you have a 90 it maybe different.

Craig
'92 100S (117k)
'00 A6 4.2 (53k)


-----Original Message-----
From: v6-12v-bounces at audifans.com [mailto:v6-12v-bounces at audifans.com] On
Behalf Of Lt.Kubosh
Sent: Sunday, May 01, 2005 8:24 AM
To: Audi list
Subject: [V6-12v] Switch removal instruction... 

Hello,
I'd like to ask if anybody know the procedure how to remove the switches
above the radio in the center console (fog lights, rear window heater...)

Thank you

Martin


_______________________________________________
V6-12v mailing list
V6-12v at audifans.com
http://www.audifans.com/mailman/listinfo/v6-12v