[V6-12v] neutral safety switch part #

Clive Young cyoung1661 at rogers.com
Wed Sep 27 21:14:39 EDT 2006


You are probably right but I would certainly pay attention to the recent 
posts on the rear trunk wiring harness. It causes some strange stuff.
----- Original Message ----- 
From: "Ben Kwan" <1.8tquattro at gmail.com>
To: <V6-12V at audifans.com>; "Quattro" <quattro at audifans.com>
Sent: Wednesday, September 27, 2006 6:43 PM
Subject: [V6-12v] neutral safety switch part #


> Hi everyone,
>
> I have a problem with the reverse lights on my 92 100CSq.
>
> Symptoms:
>
> 1. Reverse lights illuminate in all gear selections except for neutral
> 2. interlock mechanism clicks when in drive after releasing the brake from 
> a
> complete stop.  I always thought the mechanism works in Neutral or Park.
>
> Has anyone run into this problem before?
>
> Did some research on the internet and found that this could be the 
> infamous
> neutral safety/multifunction switch that's tucked on top of the tranny
> behind one of the mounts.  Does anyone have one laying around that might 
> be
> from a 92 100CSq?  I need the ZF part number on the unit in order to get 
> the
> correct unit.  The Audi part number is 4A0 919 821 but DAD's Auto is 
> telling
> me that there were a few versions of the switch for those cars.
>
> Thanks,
> Ben
>
> 92 100CSq
> 94 90S
> 01 A41.8tq
> _______________________________________________
> V6-12v mailing list
> V6-12v at audifans.com
> http://www.audifans.com/mailman/listinfo/v6-12v 



More information about the V6-12v mailing list