[V6-12v] V6-12v Digest, Vol 74, Issue 1

[Tom Leppke-Hennig]

I don't have a step by step per-se, but can tell you how to do it.

Remove front bumper skin and bumper. Remove head lights and the associated
brackets and hardware. Remove the center section of the upper radiator
support. NOW you are free to start removing the radiator like you would
normally be inclined to. Except now it will actually come out.

This sounds brutal, but in fact is not that bad. Take some pictures along
the way or mark the little bits and pieces, as some of the hardware took a
while to puzzle back together.

Have fun.

Tom LH

>
>    1. Radiator removal (Richard Guzzardi)
>    2. Front coolant cross pipe... (Austin Franklin)
>    3. Sliding "lock carrier" out on A4... (Austin Franklin)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 31 May 2010 22:05:41 -0400
> From: Richard Guzzardi <rguzz at mac.com>
> Subject: [V6-12v] Radiator removal
> To: v6-12v at audifans.com
> Message-ID: <22B98C81-F1A2-45F3-B830-D24CC9166551 at mac.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
> 1995 A6...someone on an Audi list recently posted a step by step IIRC
> with pics? but I can't find it. Can anyone help with this, or send me
> an ETKA diagram of the front end and radiator so I may proceed
> comfortably with this task? Thanks.
>
>
> ------------------------------