[V8] CV Joint Removal?!

[Jason Wilkerson]

Don't use a bigger breaker bar, it won't do a thing!  I had the same
problem, its because the bolt is not long enough to 'push' the shaft out
the other side.  I had to put a small socket inside the 'hole' to act as a
shim to push the shaft out.  I'm sure others have better ideas, but that
one worked for me.  Once you have the proper setup it isn't too hard to
thread the bolt in far enough to break through the hog nose on the inside!

                            Good Luck,
                                Jason

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/