[V8] Time for a new project, old project must go!
Michael Larosa Jr
Mc.Larosa at Sun.COM
Tue Feb 17 09:16:10 EST 2004
chris Semple still has a 93 v8 motor on his website.....
http://www.force5auto.com
Mike,
Jeremy Ward wrote:
>
> Al Swackhammer is selling his killer track car (see specs below) to
> start a new project. He wants to stuff 2 more cylinders into his '96
> A6... Can you blame him?
>
> He is looking for a 4.2l (V8/A8) donor with a good motor (duh), ecu,
> wiring harness, etc. He is also looking for a buyer for his track car
> and/or trailer (or perhaps as trade for the donor). Al is located in
> Washington State.
>
> If you have any leads for him or advice for his conversion, please drop
> him an email.
>
> And I thought *we* were obsessed with power... Look at those specs!
> <drool>
>
> - Jeremy
>
> -----Original Message-----
> From: Al Swackhammer [mailto:a.swackhammer at comcast.net]
> Sent: Monday, February 16, 2004 6:54 PM
> To: Jeremy Ward
> Subject: Re: 4ktq for 4.2l
>
> FOR SALE
> '84' 4KTQ w/TRAILER
> $6500
> Al Swackhammer 206-546-3313 or a.swackhammer at concast.net
> Head work:
> Large exhaust valves
> 276 Schrick cam, dry filmed coated w/ solid lifters
> Machined for stock brake booster pump
> Pressure pop off valve on intake manifold
> Ceramic coated intake
> Adjustable cam gear
> Engine JT block:
> Ceramic coated piston tops and dry filmed coated skirts
> 0 gapped rings, (Total Seal)
> Dry filmed coated wrist pins
> Clutch: Centerforce, custom w/pressure plate and disk. Built for 375 HP
> Suspension:
> Solid sub-frame bushings made of aluminum
> Control arm bushings made of delrin
> Koni adjustables on all four corners
> Stock '84' springs
> Ronal 15X7 magnesium wheels w/ 225-50-15 Yokahama A032A tires
> Rebuilt (taken apart and new grease) CV joints X10
> Steering tie rod ends moved to top of struts
> Rear sway bar
> Exhaust:
> Custom 3" from down pipe back w/5' chromed tip
> Exhaust manifold and down pipe ceramic coated
> Brakes:
> DPI recirculation system w/ adjustable bias valve. Steel braided lines.
> Pedal pads for foot traction
> Cooling: Custom 4 row R core radiator w/cooling fan.
> Custom Spearco Intercooler
> Custom roll cage
> Custom Momo drivers seat w/Simpson 5 point harness. Adjustable track.
> Too many gauges, but very helpful.
> Trailer:
> Dual axle with brakes, winch, load leveling hitch.
> Diamond plate aluminum storage box.
> 20' X 20' canopy
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question? Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
--
_/_/_/ _/ _/ _/ _/ Mike LaRosa
_/ _/ _/ _/_/ _/ TSE - HAS
_/_/_/ _/ _/ _/ _/ _/ 1617 Southwood Drive
_/ _/ _/ _/ _/_/ Nashua, NH 03063
_/_/_/ _/_/_/ _/ _/
S U N Phone: 781/442-1250
S E R V I C E S Fax: 781/442-5488
Email:mc.larosa at sun.com
More information about the V8
mailing list