[V8] Headlight switch

[dsaad at icehouse.net]

You are gonna need this to do any serious trouble shooting:

http://www.geocities.com/MotorCity/Flats/1469/V8QWires.htm

Dave


Quoting george.fallot at verizon.net:

>   I finally got around to trying to fix my no low beam trouble on my 90
> V8. I took apart the switch but didn't find anything wrong with it. I
> cleaned it up anyway and put it back together. The only thing I found 
> was that the top right pin on the connector had been "over" heated. I
> cleaned that up also. However, I still had no low beams. I checked the
> fuses again and they were ok. I did notice that they had no power . Is
> this because the 12 volts comes from the switch? Anybody have any
> advice?
> 
>    Thanksw, George
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>