[V8] Headlight switch

[george.fallot at verizon.net]

  I finally got around to trying to fix my no low beam trouble on my 90 V8. I took apart the switch but didn't find anything wrong with it. I cleaned it up anyway and put it back together. The only thing I found  was that the top right pin on the connector had been "over" heated. I cleaned that up also. However, I still had no low beams. I checked the fuses again and they were ok. I did notice that they had no power . Is this because the 12 volts comes from the switch? Anybody have any advice?

   Thanksw, George