[V8] Timing Belt Job ( stuck bolt )

[Kneale Brownson]

You talking about the Torx head screws inside (half a dozen) or the Allen
head nut things on the outside (2 per side, I think)?

Anyway, a screw extractor of the right size might work in the hole already
there.  Otherwise, you'd need a screw extractor drill bit (reverse drill
bit).  You can get individual sizes or a set from Sears.

At 10:02 AM 7/16/2004 -0800, rudedog714 wrote:
>I started my timing belt job. Lo and behold, I get stuck on the last bolt on 
>the timing belt cover. The bolt head is swirled. When I try to twist it 
>loose the fresh 6 point socket just twists off. Tried levering the socket 
>onto the bolt head as I turn and no luck. Any fresh suggestions from clear 
>and experienced heads out there? Thanks, Bill