[V8] Distributor rotors

[Ed Kellock]

I believe I recall that I was able to crack them off with some channel lock pliers.  Was much less traumatic than I imagined.

============================================================
From: "Coleman, David" <David.Coleman at blackrock.com>
Date: 2004/03/19 Fri AM 10:14:38 MST
To: <Ryandfreise at aol.com>,  <v8 at audifans.com>
Subject: RE: [V8] Distributor rotors

> I have what appears to be push/glue on rotors on both 
> distributors and I just 
> got a couple new 
> ones only to find that they are both the set screw type. Can 
> I use them on both 
> distributors? Do I need to have the set screw?

Hammer/chisel/scrape off the old rotors (and all the little glue remnants) from the shafts, slip on the new rotors, using the set screw on both and reinstall.   No problem interchanging glue/screw on left/right distributors.

-DaveC.
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
============================================================