[V8] O2 sensor

[Tony and Lillie]

The gray wire is the extra, it needs to go to the other ground. I ran mine 
to the ground for the aux fan on the drivers shock tower. If you are 
planning on keeping this car, I'd also recommend getting the plug from a 
Ford. Any of the 4.6 cars use four of them, so it shouldn't be hard to find 
one. The colors aren't the same on the plug, but just line them up by 
position, and connect like wires. The two whites are the same, so they can 
go to either corresponding white. same for the black wire.
HTH
Tony Hoffman
----- Original Message ----- 
From: "lschor" <lschor at westga.edu>
To: <v8 at audifans.com>
Sent: Wednesday, September 29, 2004 3:58 PM
Subject: [V8] O2 sensor


>I purchased an O2 sensor for a Ford E-350. The stock unit has three wires 
>and
> the new one has four. Any help on wiring would be greatly appreciated.
>
> Larry Schor
> 91 V8qm
> 91 Alfa 164 S
> 84 Alfa Spider
> 67 Chevy C10
> 03 Audi A4 Avant
> 64 Fordson Super Dexta (tractor)
>
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all 
> contributions welcome!