[V8] Fault code 2341

[Coleman, David]

With all the talk of non-OE O2 sensors, and just to xpound on Keith's post, recall the proper O2 replacement, whatever the original application intended, is to keep the cable/wires near as possible to the factory length. 

FWIW,
Davec



--------------------------
David A. Coleman
BlackRock
Sent via BlackBerry Wireless


-----Original Message-----
From: v8-bounces at audifans.com <v8-bounces at audifans.com>
To: V8 at audifans.com <V8 at audifans.com>
Sent: Fri Apr 15 18:27:40 2005
Subject: Re: [V8] Fault code 2341

In a message dated 4/15/05 1:01:06 PM Eastern Daylight Time, 
john at bysinger.net writes:

> Reason we tested this one, is the ford part was $120 through the local 
> parts
> shops, and $140 from the dealer...  didn't make sense to me either, with
> ford being a dime a dozen you'd think the o2 would be cheap as well
> 

 That for the exact part number, meaning with the exact length cable. The 
sensor itself probably matched about 10 Mazda apps and probably every one had the 
same connector.
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!


THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.