[V8] Got to visit with Zay and Tony in Vegas

[Greg Furstenwerth]

Now I am having all kinda problem sorry if this doubleposts

What I am wondering is where it is located how to get the socket or 
whatever up there without having to remove anything... it is being 
blocked by part of the subframe on the 93 v8...



Kneale Brownson wrote:

>I cut the wire at the sensor and put a long socket over it.  Used a breaker
>bar and piece of pipe as an extension.  They make a special socket with a
>slot in it for the wire, but the amount of trouble I had (part of the
>threads from the sensor remained in the bung) probably would have led to
>the socket failing.  I had to run a tap through the bung several times to
>clean it out before installing the replacement sensor.
>  
>