[V8] Got to visit with Zay and Tony in Vegas

[Kneale Brownson]

Ahhhh, my experience was with a '90 V8, where the "Y" in the piping that
contains the sensor is marginally available.


At 06:58 PM 12/5/2005 -0800, Greg Furstenwerth wrote:
>Now I am having all kinda problem sorry if this doubleposts
>
>What I am wondering is where it is located how to get the socket or 
>whatever up there without having to remove anything... it is being 
>blocked by part of the subframe on the 93 v8...
>
>
>
>Kneale Brownson wrote:
>
>>I cut the wire at the sensor and put a long socket over it.  Used a breaker
>>bar and piece of pipe as an extension.  They make a special socket with a
>>slot in it for the wire, but the amount of trouble I had (part of the
>>threads from the sensor remained in the bung) probably would have led to
>>the socket failing.  I had to run a tap through the bung several times to
>>clean it out before installing the replacement sensor.
>>  
>>
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!