[V8] new problem I need help with - no start :(

[Kneale Brownson]

V8 Ignition Reference Sender (G4) is part number 077 905 381.  The Engine
Speed Sender (G28) is 077 905 381A.  They are interchangeable except the G4
 has black coating on the connector and G28 has gray.  I used two G28s and
put black tape on the connector for the reference sender position so I
would not mix up the connections.

At 09:37 PM 1/20/2005 -0500, z1sales at z1auto.com wrote:
>thanks!  Anyone happen to have a part number?
>
>Adam
>Z1 Performance
>www.z1auto.com
>631-863-3820
>
>
>----- Original Message -----
>From: DasWolfen at aol.com
>To:  z1sales at z1auto.com
>Cc: v8 at audifans.com
>Sent: Thu, 20 Jan 2005 21:21:04 EST
>Subject: Re: [V8] new problem I need help with - no start :(
>
>Its not tough to diagnose at all....you described the classic "engine speed" 
>sensor (aka RPM sensor) failure mode.
>
>RPM sensor heat soaks while the car is running in slow traffic or idling in a 
>driveway....the ECU thinks the engine isnt running and shuts down the 
>fuel....car will not restart until the sensor cools off.
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!