[V8] reference sensor and rpm sensor replacement?

[William Gutierrez]

Hi,

I did one of them last year.  Someone on here said go in from above.  I had 
no success from that angle.  I just don't see how you can manipulate them 
unless you pulled this exhause manifold, which is more work than I wanted to 
do.  I went in from below and was able to get reasonable access, but it 
required loosening the mounts on several hoses so they could be moved aside. 
  Once I figured it out, it took only about 20 minutes to get them out and 
back in.  The figuring out part took far longer.

good luck.

Bill G.

>From: "Z1 Performance" <z1sales at z1auto.com>
>Reply-To: Z1 Performance <z1sales at z1auto.com>
>To: <V8 at audifans.com>
>Subject: [V8] reference sensor and rpm sensor replacement?
>Date: Fri, 28 Jan 2005 17:47:00 -0500
>
>I'll keep it simple - am I going to be here all night doing both of these?  
>Any tricks or a writeup posted anyplace?  Thanks guys!
>
>Adam
>Z-1 Performance, Inc.
>www.z1auto.com
>(631)863-3820 Tel.
>(631)863-3821 Fax
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!