[V8] Window problems

[Greg Furstenwerth]

I was planning on doing this till I realised that drivers side switch
was non-oem so swapped that with the passenger side one and whiz bang it
works.

Peter A. Green wrote:

>Armed with a printout from my 'Bentley's, a Volt/Amps/Ohm meter, the suggestions from the e-mails to Greg I decided to tackle my non-operating passenger side window.
>
>+12v appears on pin 4 of the switch
>ground appears on pin 5 BUT,
>there is open circuit on pin 3 (which should also be at ground).
>
>As a quick fix.... can I join pins 3 and 5 giving a common ground.  It seems an obvious fix... however I have learnt that nothing is obvious on the Pear!
>Any BTDT experience or suggestions gratefully received.
>Pete
>'90 V8Q Pearl
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
>
>  
>