[V8] "No Start" Problem

[Buchholz, Steven]

... if you don't get the *resistor* that goes with it you may not be
able to blink much out!  Scott's page has the detail.  The thing is ...
you don't *need* an LED ... I've got a lamp with pigtail ... I think it
is the one that would back light the HVAC display on an old Audi Coupe
... which I have in the glove box for reading out codes.  You don't have
to worry about getting the polarity right with an incandescent bulb ...
or a dropping resistor ... 

Steve B
San Jose, CA (USA)
> 
> I guess the time has come to give into "Code Reading"  This "List" has
saved
> me over the years and I've been very lucky with any V8 problems.  Off
to Radio
> Shack I go.
> 
> -----Original Message-----
> 
> Go to Radio Shack and pick up an led, get some butt connectors and
you're
> good to go.
> 
> See here:  http://www.sjmautotechnik.com/trouble_shooting/ecufv8.html