[V8] crank seal/oil pump seal-bearing

[cobram@juno.com]

I had a very stuck seal, couldn't get it out with the tool you linked to,
nor the tool in the manual (borrowed from dealer),  the only way it came
out was to put 2 sheet rock screws through the old seal, then pull it out
with a pry bar.  

BCNU,
http://www.geocities.com/cobramsri/
On a long enough timeline, the survival rate for everyone drops to zero.

Kneale Brownson <kneale at coslink.net> writes:
> http://www.thetoolwarehouse.net/shop/LIS-56750.html   
> 
> At 12:19 AM 10/5/2005 -0600, John Dodd wrote:
> >These items seem to require special tools.I have all the seals I 
> just
> >don't know if I should bother 
> >since I 've never done it before and I might screw something up
> >especially without the tools.
> >Any BTDT ?