[V8] how to hold sprockets

[Kneale Brownson]

I don't know about the AllData, but the books the factory supplied to Audi
dealerships, collectively called "Repair Manual, V8 Quattro" says on page
15-30-8 "For each cam, fit locating flange 3199.......Secure flange 3199
tightly with distributor mounting bolts.....loosen mounting bolts for
camshaft sprokets....."   This is in the description of removing the timing
belt.

At 08:41 AM 10/6/2005 -0600, JOHN DODD wrote:
>The reason I asked about the tool is because the procedure says do not use 
>the cam holders as a blocker when loosening the bolts on the sprockets.
>So how do you secure them ?
>John
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!