[V8] more tool questions

[Kneale Brownson]

I have a 1/2" breaker bar with a two-foot handle that I slide a 30-inch
long piece of 1 1/2" waterpipe over and then add a four-foot piece of 3"
pipe.  Takes most of my 200+ pounds to break the bolt loose.   Here's my
set-up at work on my 200q20v:
http://www.pbase.com/kneale_brownson/image/22500158   I don't like to use
my impact on bolts/nuts I want to reuse.   The impact is a 3/4 drive CP.
I tried it on the 200.  It wouldn't do the job with 125 psi air.  I'd have
to drag out my compressor that gets to 180 psi.


At 10:56 AM 10/6/2005 -0600, John Dodd wrote:
>I'm borrowing some tools so could you please let me know what is needed
>for the crank bolt ?(the one with the big torque)
>I do have the TB tools .
>Do I need a breaker bar 1/2 or 3/4 inch drive ?
>I got a torque wrench that's good to 600 ft-lb but it's a 3/4 drive.I do
>have an adapter to 1/2.
>thanks
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!