[V8] tips for water pump gasket

[Buchholz, Steven]

... good question ... ISTR fitting the pump/gasket dry ... just having a
couple of the WP attaching bolts installed and using them to keep things
in place while sliding the pump in.  I may have used a dab or two of
Hylomar to tack the gasket to the pump ... Hylomar never hardens, so you
don't have to worry about gluing the gasket to something ... 

Steve B
San Jose, CA (USA)
> 
> Any advice on how to do deal with the WP gasket to make it stick to
the
> pump or the block to ease the installation ?
> I got some "form a gasket " compund.I was told to use it but I prefer
to