[V8] tool to hold sprockets

[R Broberg]

I don't understand why everyone spends so much time with the cam locks and,
worse yet, taking off the cam sprockets.  Have never (in 3 TB changes on a
V8) had to do either.  I leave the distributors alone, too. You can do the
whole TB job with a very long 3/4" drive extension and a harmonic balancer
holder as your only special items.  I made the balancer holder.  Anyone in
the Midwest wants to borrow it is welcome to it.
Roland

Roland Broberg
Broberg Engineering-BECO
Delafield. Wisconsin USA
----- Original Message ----- 
From: "JOHN DODD" <jidodd at shaw.ca>
To: <v8 at audifans.com>
Sent: Thursday, October 06, 2005 10:26 AM
Subject: [V8] tool to hold sprockets


> Shows how much I know about tools.I didnt't know that there is a generic
sprocket holder.I was aware not to use 3199 as a blocker.
> John
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
>