[V8] how to hold sprockets

[Kneale Brownson]

Tool 2079 is the crank bolt wrench with the triple-square 3/4" hole in the
end to take a 3/4" drive torque wrench.

At 02:50 PM 10/6/2005 -0700, Buchholz, Steven wrote:
>I loosened the cam pulley bolts while the belt was still attached ... I
>think I had the crank pulley lock tool in place ... 
>
>On the other question about loosening the crank pulley bolt ... the
>factory tool 2087??? Has a square hole which is sized for a 3/4" drive
>... and you need it ... 
>
>Steve B
>San Jose, CA (USA)
>> 
>> The reason I asked about the tool is because the procedure says do not
>use the
>> cam holders as a blocker when loosening the bolts on the sprockets.
>> So how do you secure them ?
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!